|
|
"WET LOOK" Stone Sealer 16oz
MSRP: $62.00
Price: $40.00
You Save: $22.00 (35 %)
Manufacturer: Prevent Home Products
Please allow 1 - 2 weeks for delivery.
|
|
Love the color of your honed marble, limestone, travertine, granite or other natural stone when it gets wet? Then, Prevent "Wet Look" Sealer is just what you are looking for.
PREVENT'S "Wet Look" Sealer is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. "Wet Look" Sealer is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile, grout, concrete and masonry surfaces. Prevent's "Wet Look" Sealer will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. May also be used as a pre-grouting sealer. Allows moisture-vapor transmission. It also effectively seals and darkens the color of grout joints.
Best Penetrating Sealer on the market for:
* Granite
* Marble
* Sanded Grout
* Limestone
* Sandstone
* Cement
* Slate
* Brick.
* Any porous stone or rock based surface
Other Features:
* Food Prep Areas
* Interior & Exterior Use
* Long lasting when exposed to the elements
* UV Transparent
Technical Specifications:
* Coverage 300-1900 feet/gallon or up to 3000sf on Polished Surfaces
* Available in pints and soon in quarts.
* VOC Compliant
Directions: Test on a spare tile or inconspicuous area for desired results. The stone surface must be free of any coating, dust, soiling, etc. Start with an area approximately 3 to 4 square feet. Apply Impregnating Sealer with a soft white terry cloth. Apply sealer to cloth and spread evenly over the surface. DO NOT ALLOW TO PUDDLE OR SET ON SURFACE. Allow to penetrate for 45 minutes to 1 hour. To assure surface has been adequately sealed place a few drops of water on the stone. If the water beads, the stone is adequately sealed. If absorption occurs apply an additional application of sealer. Let cure for at least 3 to 4 hours prior to use. Impregnating Sealer may require more than one application on very porous marble, travertine, limestone, slate, and onyx surfaces.
CAUTION: Causes eye and skin irritation. Avoid contact with skin, eyes and clothes. In case of contact, flush thoroughly with water. If irritation persists, seek medical attention. Do not swallow. Keep out of reach of children. |
Product Reviews
|
|
|